Rohloff Monkey Bone -10 IS to Post-Mount Adapter

The Monkeybone is an adapter in order to derive the torque for the Rohloff Fatbike XXL 190mm hub directly to the frame. By the XXL 190mm hub version is used the base of the housing body of an XL 170mm hub version and the disc mount of the hub is 10mm too far inside. Using the Monkey Bone -10 adapter, the mounting of the brake cylinder by this value is shifted inward (toward to the frame center). Available for 160mm and 180mm disc.

The Monkey Bone -10 has a special slot cut around the rearward bolt hole, allowing it to interface directly with the OEM2-10 axle plate. This solution simplifies the hardware required to use the Rohloff Fatbike XXL 190mm hub with a disc-brake setup.

The Monkey Bone -10 is not compatible with IS brake caliper or with frames with integrated/direct postmount.

Attention: If permission has not been granted by the frame manufacturer to mount the Rohloff Monkey Bone -10, Monkey Bone -10 or the support bolt through the disc brake mount, then mounting of the OEM2-10 (not included in delivery) versions is at your own risk.
Included in delivery: 1 Monkey Bone -10